Water Damage Restoration Frisco TX

Water damage help for North Texas homes

Water damage in Frisco and the cities around it usually starts in one of a handful of places: a supply line or fitting that fails, an attic water heater or AC drain pan that overflows onto the ceiling, a slab leak under the foundation, a hail-damaged roof, or a sewer line that backs up. Whatever the source, the first 24 to 48 hours matter most. Water wicks up drywall, soaks into carpet pad and swells baseboards and cabinets, and mold can start growing on wet materials within a day or two in a warm house.

Elm Fork Water Restoration is a referral service: we connect you with an independent local water damage restoration company, which gives you its own price and does the work. Many local restoration companies run 24/7 emergency crews with truck-mounted extractors, air movers and commercial dehumidifiers, and they can usually work with your insurance company on documentation. We don't adjust claims, and we'll never offer to cover your deductible, which Texas law doesn't allow.

Water damage services

24/7 emergency water removal

Water on the floor right now? Get connected with a local crew that runs emergency extraction around the clock, including nights and weekends.

Emergency help →

Water extraction & structural drying

Standing water pumped out, wet carpet and pad extracted, then air movers and dehumidifiers set and checked until walls and floors read dry.

How drying works →

Burst & frozen pipe damage

Frozen pipe split in a freeze, a failed supply line, or a fitting that let go in the wall: water removed and the house dried out.

Burst pipe help →

Slab leak & flooded floors

Warm spots on the floor, a meter that spins with everything off, wet carpet with no visible source. Floors and walls dried after the leak is found and fixed.

Slab leak help →

Ceiling leaks

Stain spreading, drips or a sagging ceiling from an upstairs bathroom, an attic water heater, AC condensate line or roof leak.

Ceiling leak help →

Storm & rain water damage

Flash-flood rain, hail-damaged roofs and wind-driven water through windows and doors: wet rooms extracted and dried.

Storm damage help →

Sewage backup cleanup

Toilet overflow or sewer backup into the house: contaminated water removed, affected materials taken out, and the area cleaned and sanitized.

Sewage cleanup →

Mold after water damage

Musty smell or spots after a leak? Small areas can be cleaned; larger mold jobs in Texas go to a TDLR-licensed remediator, and we'll refer you to one.

Mold and Texas rules →

Water coming in right now?

Stop the water, then stay safe. Close the fixture valve or the house main. Stay out of rooms where water is near outlets or cords, and away from sagging ceilings. Don't touch sewage or floodwater without gloves and boots. Then take photos and call. Full first-hour checklist.

How it works

Call or send the short form with your city and what happened.
An independent water damage company that covers your area calls you back, talks it through and sets an arrival time. Many offer around-the-clock emergency service.
The crew inspects, gives you a written estimate or work authorization, and starts extraction and drying. You decide whether to go ahead.

What to ask any water damage company

Are your technicians trained in water damage restoration, for example IICRC WRT certified?
Do you carry general liability insurance, and can you send a certificate?
Will you take daily moisture readings and give me the drying log?
What's your after-hours fee, and do you bill my insurance directly?
If you find mold over 25 square feet, who handles it? (In Texas it has to be a TDLR-licensed remediator.)

What water damage restoration typically costs

Job	Typical range*
Minor clean-water leak, one area (Class 1)	$150 – $500
Significant damage, up to one room or so (Class 2)	$1,500 – $5,000
Extensive damage: walls, ceiling, subfloor in one or more rooms (Class 3)	$5,000 – $15,000
Extraction and drying, clean water (Category 1)	$4 – $6 per sq ft
Extraction and drying, gray water (Category 2)	$6 – $9 per sq ft
Extraction and cleanup, black water / sewage (Category 3)	$9 – $12 per sq ft

*HomeGuide, Water Damage Restoration Cost (Feb 2026), homeguide.com/costs/water-damage-restoration-cost. National ranges, rounded; not quotes. Your price depends on how much is wet, the water category, what has to be removed and after-hours fees, so get a written estimate before work starts.

Full water damage cost guide →

Where we take requests

Our main service area is Frisco, Prosper, Celina and Little Elm, plus McKinney and The Colony. Each page covers the homes and the water problems common there:

Common questions

How much does water damage restoration cost?

HomeGuide's 2026 national guide puts the average water damage restoration job at about $2,000 to $6,000, from $150 to $500 for a small clean-water leak up to $5,000 to $15,000 for extensive damage across rooms. Extraction and drying runs about $4 to $12 per square foot depending on how contaminated the water is. Get a written estimate first.

How fast do I need to start drying?

As soon as the water is stopped. Mold can begin growing on wet drywall and wood within about 24 to 48 hours, and the longer materials stay wet, the more has to be torn out.

Does homeowners insurance cover water damage in Texas?

Many policies cover sudden, accidental water damage such as a burst pipe, but not gradual leaks, and not rising floodwater without separate flood insurance. Only your insurer can answer for your policy, so call them and report the loss.

Do you handle mold?

Not directly. Texas requires a TDLR-licensed mold remediation contractor for mold covering 25 contiguous square feet or more. We refer those jobs to licensed remediators.

Who comes to my house?

An independent local water damage restoration company that serves your city. We're a referral service, so that company gives you its own estimate and is responsible for the work.

Water Damage Restoration in Frisco, Prosper, Celina & Little Elm

Get a local crew on the way